1 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com nach 100 m 35v 5x6.3 tr 13 y f rohs compliant 97% sn (min.), 3% bi (max.) 330mm (13?) reel tape & reel size in mm working voltage tolerance code m=20% capacitance code in mf, rst 2 digits are signi cant third digit is no. of zeros, ?r? indicates decimal for values under 10 f series part number system optional: suitable for automotive equipment, sourced to special production and inspection at ts-16949 certi ed production site specifications are subject to change features ? cylindrical v-chip construction ? wide temperature -40 ~+105c ? long life (+105c, 2000 hours) ? 6.3 mm maximum height ? designed for reflow soldering ? meets the requirements of aec-q200* *contact nic for supporting test data surface mount aluminum electrolytic capacitors nach series characteristics precautions please review the notes on correct use, safety and precautions found on pages t10 & t11 of nic?s electrolytic capacitor catalog. also found at www.niccomp.com/precautions if in doubt or uncertainty, please review your speci c application - process details with nic?s technical support personnel: tpmg@niccomp.com rated voltage range 4 ~ 50vdc rate capacitance range 1.0 ~ 220f operating temp. range -40c ~ +105c capacitance tolerance 20% (m) max. leakage current after 2 minutes @ 20c 0.01cv or 3a whichever is greater working voltage/surge voltage max. tan @120hz/20c w.v. (vdc) 4 6.3 10 16 25 35 50 s.v. (vdc) 5 8.0 13 20 32 44 63 dissipation factor 0.50 0.30 0.22 0.16 0.14** 0.12 0.12 low temperature stability impedance ratio @ 120hz z-40c/z+20c 7432222 z-55/z+20c 12864433 load life test @105c 2,000 hours capacitance change within 25% of initial measured value tan less than 200% of speci ed value leakage current less than speci ed value cap ( f) code working voltage (vdc) 4.0 6.3 10 16 25 35 50 1.01r0------ 4x6.3 2.22r2------ 4x6.3 3.33r3------ 4x6.3 4.74r7---- 4x6.3 - 5x6.3 10 100 - - - 4x6.3 - 5x6.3 6.3x6.3 22 220 - 4x6.3 - 5x6.3 - 6.3x6.3 - 33 330 - 4x6.3 5x6.3 - 6.3x6.3 - - 47 470 4x6.3 5x6.3 - 6.3x6.3 - - - 100 101 5x6.3 6.3x6.3 - -- - - - 220 221 6.3x6.3 ------ standard values and case sizes (mm) *see part number system for details pnbs fdil rohs compliant includes all homogeneous materials
2 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com case size a b c 4 1.0 2.6 1.8 5 1.4 3.0 1.8 6.3 1.8 3.6 1.8 a c b recommended land pattern dimensions (mm) specifications are subject to change surface mount aluminum electrolytic capacitors nach series dimensions (mm) 0.3mm max. d l + - i i w p a b case size d 0.5 l max. a 0.2 b 0.2 i 0.2 w p 0.2 4 x 6.3 4.0 6.3 4.3 4.3 1.8 0.5 ~ 0.8 1.0 5 x 6.3 5.0 6.3 5.3 5.3 2.2 0.5 ~ 0.8 1.5 6.3 x 6.3 6.3 6.3 6.6 6.6 2.5 0.5 ~ 0.8 2.2 nic part number cap. (f) w.v. (vdc) dissipaton factor (tan ) max. ripple current (ma) +105c/120hz maximum esr () +20 o c/120hz load life hours @ +105c nach470m4v4x6.3tr13f 47 4.0 0.50 34 17.7 2,000 nach101m4v5x6.3tr13f 100 0.50 61 8.31 2,000 nach221m4v6.3x6.3tr13f 220 0.50 82 3.77 2,000 nach220m6.3v4x6.3tr13f 22 6.3 0.30 26 22.6 2,000 nach330m6.3v4x6.3tr13f 33 0.30 29 15.1 2,000 nach470m6.3v5x6.3tr13f 47 0.30 46 10.6 2,000 nach101m6.3v6.3x6.3tr13f 100 0.30 71 4.98 2,000 nach330m10v5x6.3tr13f 33 10 0.22 43 11.1 2,000 nach100m16v4x6.3tr13f 10 16 0.16 28 26.6 2,000 nach220m16v5x6.3tr13f 22 0.16 39 12.1 2,000 nach470m16v6.3x6.3tr13f 47 0.16 70 5.66 2,000 nach4r7m25v4x6.3tr13f 4.7 25 0.14 22 49.5 2,000 nach330m25v6.3x6.3tr13f 33 0.14 65 7.05 2,000 nach100m35v5x6.3tr13f 10 35 0.12 28 19.9 2,000 nach220m35v6.3x6.3tr13f 22 0.12 55 9.05 2,000 nach1r0m50v4x6.3tr13f 1.0 50 0.12 10 199 2,000 nach2r2m50v4x6.3tr13f 2.2 0.12 16 90.6 2,000 nach3r3m50v4x6.3tr13f 3.3 0.12 16 60.4 2,000 nach4r7m50v5x6.3tr13f 4.7 0.12 23 42.4 2,000 nach100m50v6.3x6.3tr13f 10 0.12 35 19.9 2,000 ripple current frequency correction factor frequency hz 50< f <100 100< f <1k 1k< f <10k 10k< f <100k correction factor 0.8 1.0 1.3 1.5 review & compare re ow soldering heat limits v-chip smt aluminum electrolytic capacitors www.niccomp.com/rsl standard values, case sizes and specifications for automotive equipment see part number system
3 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com taping specifications (mm) 1. both leader and trailer tape: minimum 40mm (1.57") empty carrier tape pockets. 2. leader tape: approximately 20cm of cover tape at leader. 3. connection: maximum 3 connections (slices) per reel. case size a 0.5 b 0.5 c 0.3 d 0.1 p 0.1 t 0.2 t 0.2 4 x 6.3 4.7 4.7 12.0 5.5 8.0 6.4 0.6 5 x 6.3 5.7 5.7 12.0 5.5 12.0 6.4 0.6 6.x x 6.3 7.0 7.0 16.0 7.5 12.0 6.5 0.6 13? 0.5 3.0 0.5 330 or 380mm 50? min. 21 0.8 2.00.5 w t a p feeding + - 1.5? +0.1/- 1.75 d b c 1.5+0.1/-0 1.75 + 0.15 t 4 + 0.1 embossed carrier dimensions (mm) reel dimensions and quantities case size w 1.0 reel quantity 330mm reel quantity 380mm 4 x 6.3 14 1,200 1,000 5 x 6.3 14 800 1,000 6.x x 6.3 18 800 1,000 surface mount aluminum electrolytic capacitors nach series specifications are subject to change
|
